One of the essential tasks to keep your car is to make sure that the engine oil level is always in optimal parameters. The engine oil is the “blood” of the car engine, ensuring the correct lubrication of all internal components.
It is very important to know when and how to create an engine oil complement to avoid problems in the use of your car, especially because this is the main component of any vehicle and any malfunction can be expensive.
content
When do you need a supply of engine oil?
Complete oil for cold or cold engines: how to perform this process?
1. When do you need a supply of engine oil?
First of all, it is essential to understand that the engine oil should not be consumed significantly between regular and programmed exchanges. However, there are situations where it is possible to have a higher oil consumption. For example, if you have a sporty car, it is normal for this more oil consumption when driving more aggressive. Or maybe you have a certain type of engine that is more consumer. For this reason, it is important to complete oil in case of need.
It is recommended to check the level of engine oil at least once a month, especially if you travel long distances or your car has an excellent mileage. If you want a smaller mileage car, you can find one in the car sales category on our site, carsandcare.ro. It is also important to check if you have leaks or leaks. For example, if you notice the oil stains under the car or find that the level drops quickly, it is necessary to immediately complete the oil.
The supplementation of the engine oil is always performed by respecting the manufacturer’s recommendations or using the car instruction manual. In this way it is possible to find the recommended frequency of verification and completion, as well as the type of oil required or the recommendations relating to other types, as well as as it is possible to maintain the oil for a longer life and the physical way is replaced or completed.
2. Complete hot or cold motor oil – How to perform this process?
The addition of the engine oil is a simple operation, but it must be performed correctly to avoid further problems. First of all, it is important to know the type of oil to be used for the engine of your car. Another important aspect to consider is if you check and a supplement with hot or cold motor oil. The manufacturers recommend that the oil control be performed after the engine start and reached the optimal operating temperature, then stopped and left 5-10 minutes to drain the oil bath. Following the same principle, we recommend a complement with the oil for hot engine. In this way you will ensure that the level is what you want.
If you know that you cannot start the engine and you have to do this cold operation, complete a lesser quantity, then when you can start the engine and reach the optimal temperature, perform a new check and a complement if applicable.
To check the oil, you need to find the oil measurement rod, called “Joja”, which is usually colored in screeching colors and positioned in the front or on the engine side. Sometimes it can be marked with a sign of the oil, more precisely a dripping ship. Extract the joja, dry it with a clean towel, a cloth or napkin and completely reintroduce it. Then extract it again to check the level. At the end of the auction there is a marked area. The oil level should be between the minimum and maximum marking.
Find the lid of the oil hole, marked by the specific sign and use the original oil glass or a funnel, to gradually add the liquid to the filling hole. Don’t hurry up and don’t pour too much oil at the same time. Add several hundred milliliters to each phase and check the measurement level to avoid excessive filling. After adding it, check the level again to make sure you are among the minimum and maximum signs on the auction. Note that excessive filling damages the engine as much as the lack of oil, therefore not complete until the maximum marking. Lightly under the line it is sufficient. Then make sure to screw the oil filling cover to avoid losses.
In conclusion, the addition of the engine oil is a crucial part of the car maintenance. It is important to follow the manufacturer’s recommendations and check the normal oil level. Avoid leaks and add the right oil in the correct quantity is essential to maintain optimal engine operation and to prolong the life of the car. In addition, correct maintenance of the oil can contribute to the saving of long -term money and maintain the car performance in the best possible form.
Last post published
Completion of the engine oil – when you need it and how to do it
Lambda probe – the advantages and disadvantages of the cars that have this component
Test Drive – What does it mean, what is more details you need
Documents required for the transcription of the car: how are you preparing for a car of the car
What the car kit contains and why it is important that there is no lack of the car
Washing of machines: how to wash the car correctly, at home or in the laundry
Diesel instead of petrol – What happens when they feed the car with a wrong fuel
Rear wheel drive VS. face: what are the differences and what type of traction is recommended?
Advantages and disadvantages of a source of automotive funding
