Changing the bulb in the car is a relatively simple operation that many drivers can perform alone, thus saving a service visit. Whether you have to change the location bulb, the short phase or the long phase, there are some important aspects to keep in mind. In this article, you will find some useful suggestions and recommendations on the change of car bulbs, which cover all types of bulbs, from the position to the long -term bulb.
A car burned in the car is not only a problem relating to the aesthetic side, but it can significantly affect safety and other traffic participants. The car lights play an essential role when at night and in low visibility conditions. A burnt bulb can lead to accidents because other vehicles will not be able to notice you in time.
A useful advice that any driver should know is the periodic control of the bulbs to identify those burned and replace them in time. This is recommended both for the car you already have and for one that you buy. With so many options of Car sales Available on the market, it is essential to identify the ideal car and make sure that all electrical components work perfectly.
The signs you have to change the car bulb include:
- The light is weaker than usual.
- The bulbs do not light up at all.
- The bulbs flash or extinguish intermittently.
Tools needed to change the bulb:
- Fixed or tubular key: The key size will depend on the type of car and the location of the bulb.
- Screwdriver: It may be necessary to cancel certain hats or fixing elements.
- Tool kit: A kit of basic cars tools can be useful for having all the necessary tools at hand.
- Protective gloves: To avoid cutting or dirty hands.
- New Bec: Make sure to buy the right bulb for the type of car and for the position you will change.
2. Essential steps to change the bulbs in the car
Photo by Victoria Oarets on Pexels.com
The first step in the process of changing the bulbs in the car is to identify the type of chandelier required. The manual of your car will include specific information on the type of bulbs necessary for each lighting section. In addition, most car shops have databases that can quickly identify the type of light bulb suitable for the car model and a year. It is important to choose high quality bulbs that have a longer life and offer a strong light.
Before moving on to the actual replacement of the car’s bulb, it is important to know which types of car bulbs and position:
- Position bulbs: Located in the front and rear part of the car, they serve to report the presence of the vehicle.
- Short phase bulbs: Located in the headlights, illuminate the front of the road.
- Long phase bulbs: Located in the headlights, illuminate a wider road area in front of the car.
- Nebbia lights: Located in the lower part of the headlights or stops, they improve visibility in misty conditions.
- Stop bulbs: Located in the back of the car, the braking signals.
- Signal bulbs: Located in the front and rear part of the car, reports the change of direction.
In general, the steps you have to follow to change the light bulb are:
- Arrest the engine and remove the key from contact.
- Consult the car user manual: each car model has its own specifications in terms of access to the bulbs. The user’s manual will provide detailed information on the location of the bulbs and on the modification procedure.
- Identify the burnt bulb: the bulbs are usually located in the engine compartment, headlights or stops.
- Access the bulb: it may be necessary to open the hood, remove certain plastic caps or disassemble the light to reach the bulb.
- Disconnect the grip: before removing the old bulb, disconnect the power cap.
- Remove the old bulb: gently rotate the old bulb in the opposite direction to the clock and remove it from the base.
- Mount the new bulb: insert the new bulb into the socket and rotate it slightly clockwise until it is fixed.
- Reconnect the jack: make sure the jack is connected correctly.
- Put all the components in their place: mount all the covers and elements you removed at the beginning.
- Check if the bulb works: turn on the lights and check if the new bulb works correctly.
Changing the bulb in the car is a simple operation that any driver can perform alone, with little attention and patience. By following these passages and suggestions, you will ensure optimal operation of the car lighting system and contribute to your safety and other traffic participants.
Last post published
Completion of the engine oil – when you need it and how to do it
Lambda probe – the advantages and disadvantages of the cars that have this component
Test Drive – What does it mean, what is more details you need
Documents required for the transcription of the car: how are you preparing for a car of the car
What the car kit contains and why it is important that there is no lack of the car
Washing of machines: how to wash the car correctly, at home or in the laundry
Diesel instead of petrol – What happens when they feed the car with a wrong fuel
Rear wheel drive VS. face: what are the differences and what type of traction is recommended?
Advantages and disadvantages of a source of automotive funding
