Why are the engine or diesel engine or engine? Possible causes and how they can remedy

The rates in the operation of an engine can be a frustrating problem for drivers and can indicate a series of possible malfunctions or operational problems. In this article, you can discover some of the frequent causes of defects in petrol engines, as well as the way they can be identified and resolved to maintain the vehicle in optimal working conditions and to guarantee a driving experience without problems.

content

1. Why does the Gasolian engine give? Possible causes of motor speeds
2. Because the diesel engine is
3. Engine rates: what can you do to minimize the risk of their occurrence?

According to specialists in the field of Car salesThe main cause of motor failures is maintenance rules. Modern oils allow car manufacturers to increase the necessary distance between oil variations. However, a significant part of this growth is attributed to the desire of producers to present their product in a more attractive way or, more simply, of marketing. A longer interval among the technical services means lower operating costs and, at first glance, suggests greater reliability of the car, which makes it more attractive for consumers. But are oils currently used today? Although technologies have advanced significantly, the laws of physics (and chemistry) are still applied. The engine oil is subject to high temperatures, the fuel penetrates it, which leads to the oxidation and combustion of additives included in the composition of the oil.

Will you cause the engine failures if you don’t replace the oil?

The properties of lubrication and the ability of the oil to remain on the surface of the lubricated parts will decrease, which will lead to the appearance of “dry rubbing”, or if the metal comes into direct contact with the metal. This operating mode leads to an increase in wear of the parts that come into contact with each other. The temperature in the area increases and the parts can be blocked together, bringing at motor speed. But this is an extreme scenario. In less critical cases, the wear of the parts will help reduce the power of the engine, increasing the consumption of fuel and oil and other unpleasant phenomena.

Another possibility is related to the fact that, during use, the amount of engine oil decreases. The oil reaches the combustion chamber and burns with fuel, and this process is more intense since the piston group is more consumed. In addition, the oil can drain through different gaskets that also lose their efficiency over time. The insufficient quantity of oil can lead, for example, to the fact that many important pieces remain without lubrication and are used faster.

Long -term use of candles can cause motor rates

The candles, in case of use for a long time without replacement, can affect the vehicle performance by decreasing the dynamics, increasing the fuel consumption and lighting the witness Check the engine. There are cases in which a candle can be damaged directly in the engine, with fragments that penetrate the cylinder and cause expensive engine repairs, but they are rather rare. Usually, so far, the vehicle stops, because the fuel can no longer be turned on in the engine. However, the non -asphalted fuel, entering the catalyst of the catalytic converter, will continue to burn inside, causing the “clog” of the cells and contributing to its failure.

Pause of transmission belts – another reason for motor rates

The rupture of the transmission belts can be a significant cause of motor speeds. This problem affects the synchronization between the engine tree and the camshaft, essential for optimal engine operation. When the belt breaks, the valves and pistons can clash, causing serious damage to the engine. This phenomenon is more common in distribution belt engines instead of in the chain and can lead to speed or even completely stop the engine.

2. Because the diesel engine gives the rates

If you are wondering why it provides the diesel engine, they discover that this type of engine are often caused by specific problems, being partially different from that of petrol engines by nature of the fuel and ignition system. In diesel engines, faults can derive from defective or dirty injectors, which prevent the correct spraying of fuel. In addition, clogged fuel filters or the poor quality of diesel can affect the efficiency of combustion. Unlike petrol engines, which are based on a spark ignition system, diesel engines use compression to turn on the fuel, making them more sensitive to low compression or air quality problems. At the same time, diesel engines can be caused by the sealing of cylinders or problems with the air suction system.

To avoid rates in the petrol engine, you can follow these three essential tips:

• Regular maintenance of the ignition system

Make sure that the candles and cables are in good condition and modify them at the recommended intervals. The worn candles or defective cables can cause motor failures, since the spark necessary to turn on the air and the fuel mixture is not strong or constant;

• Check and maintain the fuel power supply system

A clogged fuel filter, a defective fuel pump or dirty injectors can reduce engine efficiency and cause faults. It is important to keep these components clean and replace them when necessary;

• Using quality fuel

Lower quality fuels can contain impurities that can affect the engine performance and cause faults. The use of high quality fuel and avoiding the supply of service stations with a questionable reputation can help prevent these problems.

By tracing these suggestions, you will significantly reduce the risk of having problems with the engine. Regular maintenance of the engine and quality fuel consumption will help maintain optimal performance and avoid expensive long -term repairs.